Inclinators™

Built for the steepest sites — our own Inclinator™, since 1954

An Inclinator™ is P. R. King & Sons’ own inclined passenger lift that carries you up a steep hillside, waterfront or clifftop block on a rail, rather than straight up and down. We’ve designed, manufactured, installed and serviced every one in our Marrickville factory since 1954.

Which model do you need?

Comparison of the Single Rail and Outrigger Rail Inclinators
FeatureSingle RailOutrigger Rail
Platform size1200 × 800 mmUp to 1000 × 1300 mm
RailsSingle I-beam rack railMain I-beam + outrigger C-channel
Best forResidential steep sitesResidential & commercial sites
Capacity2 or 4 passengers (272 kg)2 or 4 passengers (272 kg)
Maximum incline45°45°
Maximum travelUp to 120 mUp to 120 m
RideSmooth, variable-speed driveExtra stability and a smoother ride
  • Since 1920Family-owned, fourth generation
  • 12,000+ liftsinstalled across Australia
  • Member of LESALift Engineering Society of Australia
  • One companymanages every install & service

What does an Inclinator™ cost?

It depends on your site’s slope, distance of travel and configuration — every Inclinator is custom-built, so we don’t publish a fixed figure. Request the price guide below, or call our team for a quote.

Each product page has a two-minute price guide that gives you a tailored estimate.

What drives the cost of an Inclinator →

Common questions

What is an Inclinator™?

Inclinator™ is our registered trademark for our range of inclined passenger lifts — a rack-and-pinion lift that carries you up a slope on a rail, rather than straight up and down. We designed and built the first one in 1954.

How steep and how far can it travel?

Both models travel up to 120 metres at inclines up to 45 degrees.

Which model do I need?

It depends on your platform needs and site — see the comparison above. The Single Rail suits residential steep sites; the Outrigger Rail adds a wider platform and extra stability for residential and commercial sites.

Can it be custom-built to my site?

Yes — every Inclinator is custom-made in our Marrickville factory, with a choice of cab styles, side infills and five standard colours.

Does it meet Australian standards?

Yes — every Inclinator is built in Australia to Australian Standard AS1735 Part 8 and has been approved by all lift authorities in Australia.

Where do you install Inclinators?

We install and service across NSW, VIC and QLD, and support Tasmania from Melbourne. Canberra and the ACT are covered from our Sydney office.

Who services it once installed?

We do — every Inclinator is designed and built in our own Marrickville factory, installed under our own project manager and serviced by P. R. King & Sons.

How much does an Inclinator™ cost?

Because every Inclinator is custom-built to your site, the price depends on the slope, the distance of travel and your configuration — so we don’t publish a fixed figure. Request the price guide below, or call our team on 1300 775 464 for a quote.

2026 price guide

Get Inclinator pricing

Tell us a little about your site and we'll email you indicative 2026 price ranges for your Inclinator — custom-built to your block, with no obligation.

  • Indicative 2026 price ranges, emailed to you
  • Free site assessment & set-out drawings
  • Designed & built in our own Marrickville factory
Step 1 of 6

How soon do you need it?