A passenger riding an Outrigger Rail Inclinator down a steep bush track beside a home, its dual-rail track visible along the slope.

Inclinators™

Outrigger Rail Inclinator™

P. R. King & Sons’ widest-platform inclined lift — an additional outrigger rail gives extra stability and room, so a steep hillside, waterfront or commercial site gets smooth, secure access up to 120 metres.

Residential & commercialWider platform, extra stability

  • Free site assessment
  • No obligation
  • Built in Australia to AS1735 Part 8

Ask DanielOur AI lift consultant

  • Since 1920Family-owned, four generations
  • Made in MarrickvilleOur own design & manufacture
  • AS1735 Part 8Approved by all Australian lift authorities
  • 12,000+ liftsInstalled across Australia

Key features & benefits

A wider platform and an additional rail — for extra stability on the busiest, steepest sites.

  • Increased stability

    A C-channel outrigger rail runs parallel to the main I-beam rail, giving a wider footprint and a smoother, more stable ride.

  • Wider platform sizes

    Platform sizes up to 1000 mm wide and 1300 mm long — like the Single Rail, available in both 2 and 4 passenger models.

  • Custom built in Marrickville

    Every Outrigger Rail Inclinator is custom-made in our own Sydney factory, with car features and finishes tailored to your site.

  • Durable, Australian-made construction

    Concrete foundations and treated-steel rails are built to last, designed and made in Australia.

  • Smooth, easy operation

    Push-button controls at each landing and in the car, a variable-speed drive, and the ability to stop, reverse, call or send the empty car.

  • A workhorse for loads

    With a 272 kg carrying capacity, it also handles gardening and building materials — not just passengers.

Specifications

Capacity
2 or 4 passengers
Rated load
272 kg
Incline
Up to 45°
Maximum travel
Up to 120 m in a straight line (site-dependent)
Rated speed
0.4 m/s
Rails
Main I-beam + outrigger C-channel
Platform size
Up to 1000 × 1300 mm
Drive
Rack & pinion, variable-speed
Standards
AS1735 Part 8

Choose with confidence

  • Serviced for the long termFixed-price servicing — we stand by every lift we install.
  • Dedicated project managerOne experienced project manager owns your installation from site assessment to handover.
  • Made and managed by usDesigned and built in our Marrickville factory, with installation managed by our own project manager.

Options & finishes

Tailor the Inclinator to suit your home.

  • Cab styles

    Choose a half-cab with a folding seat, or a full cab with a tinted Perspex dome roof and an electrically interlocked sliding door.

  • Side infills

    Perforated-aluminium or clear-acrylic side infill panels, with curved or square edges.

  • Five standard colours

    Black, Charcoal, Dark Green, Mist Green or Woodlands Grey — or a custom colour to your specification.

  • Landing controls

    Push-button controls at each landing and in the car, with an optional stainless-steel landing control post.

Australian made, since 1954

Designed and built in Marrickville — our own lift

The Inclinator™ is P. R. King & Sons' own product. In 1954 the King family built the very first Inclinator for a friend — a returned serviceman who had lost a leg in the war — so he could move freely around his steep Sydney home. We've been refining and building them in our Marrickville factory ever since.

Today every Inclinator is still designed and manufactured in our own factory, installed under our own project manager and serviced by P. R. King & Sons. Each one is built in Australia to Australian Standard AS1735 Part 8 and has been approved by all lift authorities in Australia — and Inclinators have travelled far beyond Sydney, with units installed everywhere from waterfront NSW to Fiji, Hong Kong, Canada and the UK.

  • 1954the first Inclinator we built
  • 70+ yrsbuilding them in Marrickville
  • AS1735 Pt 8Australian-built & approved

Family-owned and Australian-made since 1920.

Getting your Inclinator — 10 simple steps

From your first call to handover. Tap any step to see what happens and who looks after it.

  • We handle it
  • You / your builder
  • Your decision
  1. Consultation

    We talk through the whole process with you — remotely or at your property — to understand your site and needs and explain the complete journey ahead.

    Looked after by P. R. King & SonsYou pay No cost
  2. Design

    Your Inclinator is designed to suit your site with a surveyor or architect. We provide our standard set-out drawings as the starting point for your custom solution.

    Looked after by Surveyor / architectYou pay Payment to your surveyor / architect
  3. Budgeting

    We give you a complete project cost projection for the Inclinator, with full transparency. We quote the Inclinator only — your builder quotes their work separately, and we can provide a list of qualified builders. Some sites also need an engineer, certifier or Sydney Water.

    Looked after by P. R. King & SonsYou pay No cost
  4. Approvals

    The Development Application (DA) is lodged. You can manage this yourself, but professional guidance keeps the approval process smooth.

    Looked after by Surveyor / architectYou pay Payment to your surveyor / architect
  5. Commitment

    You confirm your choice of builder and pay a deposit to secure your Inclinator and begin the next phase.

    Looked after by YouYou pay Deposit
  6. Certification

    A construction certificate is obtained before building begins — your builder arranges this, or we can connect you with a private certifier.

    Looked after by BuilderYou pay Handled through your builder
  7. Construction

    Your builder carries out the preparatory site works, liaising with our project manager throughout for seamless coordination.

    Looked after by BuilderYou pay Handled through your builder
  8. Manufacturing

    Once the building works are complete, we custom-build your Inclinator in our Marrickville factory to the final pier locations.

    Looked after by P. R. King & SonsYou pay Progress payment
  9. Installation

    Our own certified technicians install your Inclinator, then fully test and commission it.

    Looked after by P. R. King & SonsYou pay Progress payment
  10. Handover

    We hand over to you with training and documentation, once final payment is received. From there, P. R. King & Sons keeps your Inclinator serviced for the long term.

    Looked after by P. R. King & SonsYou pay Final payment

Common questions

What is the Outrigger Rail Inclinator™?

The Outrigger Rail Inclinator™ is the widest model in our Inclinator™ range — an outdoor inclined lift with a second C-channel rail alongside the main I-beam rail, for extra stability and a wider platform. It suits both residential and commercial sites.

How is it different from the Single Rail Inclinator?

The Outrigger Rail adds a second, outrigger rail running parallel to the main rail, giving a wider platform and a smoother, more stable ride than the Single Rail model.

How steep and how far can it travel?

It solves access issues up to and including 120 metres of travel, at inclines up to 45 degrees.

How many people can it carry, and can it carry loads?

It’s available in both 2 and 4 passenger models with a rated load of 272 kg, so it can also work as a workhorse for gardening or building materials.

Is it safe — what stops the car running away?

The car runs on wheels between the upper and lower flanges of the racked rail, with the main drive gear in constant mesh — so there’s no danger of it sliding. It’s also fitted with a brake motor, an automatic overspeed governor and combined safety gear.

Does it meet Australian standards?

Yes — it’s built to Australian Standard AS1735 Part 8 for inclined lifts and approved by all lift authorities in Australia.

Can it be customised?

Yes — every Outrigger Rail Inclinator is custom-made in our factory, with car features and finishes tailored to your site, plus a choice of cab styles, side infills and five standard colours.

Is it suitable for commercial sites?

Yes — the Outrigger Rail Inclinator™ is a unique product ideal for both residential and commercial applications.

Do you install and service it yourselves?

Yes — P. R. King & Sons is responsible for every Inclinator from start to finish. Each one is designed and built in our own Marrickville factory, installed under our own project manager and serviced by us. We install and service across NSW, VIC and QLD, and support Tasmania from Melbourne. Canberra and the ACT are covered from our Sydney office.

How much does an Outrigger Rail Inclinator cost?

Because every Inclinator is custom-built to your site, the price depends on the slope, the distance of travel and your configuration — so we don’t publish a fixed figure. Request the price guide above, or call our team on 1300 775 464 for a quote.

Recent Inclinator installs

Twin-rail Inclinator carriage descending its track at Cataract Gorge, stone landing walls beside it
Cataract GorgeTwin Rail Inclinator

The pedestrian Inclinator at Cataract Gorge carries up to eight people — installed for accessibility, it became an attraction in its own right.

Read the story

Come and see us

See our access solutions in person

Visit one of our showrooms in NSW, VIC or QLD to see our lifts up close and talk through your project with our team — no pressure.

2026 price guide

Get Inclinator pricing

Tell us a little about your site and we'll email you indicative 2026 price ranges for the Outrigger Rail Inclinator™ — custom-built to your block, with no obligation.

  • Indicative 2026 price ranges, emailed to you
  • Free site assessment & set-out drawings
  • Designed & built in our own Marrickville factory
Step 1 of 6

How soon do you need it?