
A new CBD office complex wanted multi-level accessibility without sacrificing floor plate — the MC2000’s smallest-outside, largest-inside design delivered.
Read the storyThe MC2000 is a fully enclosed commercial platform lift with its own self-supporting structure, so there’s no separate machine room and only minimal building work. It carries up to 500 kg over a rise of up to 4 metres — room for more than one person — and is installed and serviced by P. R. King & Sons across NSW, VIC and QLD.

A genuine customer installation — every photo on this site is one of ours.
Gallery




















A fully enclosed lift that carries its own machine room — nothing extra to build.
The MC2000 comes with its own enclosure and is a completely self-supporting structure, so there is no separate shaft to build and building costs are reduced.
The machine room is built into the lift itself — there is no external controller room to find space for anywhere in the building.
A larger floor space and a 500 kg rated load make the MC2000 well suited to accessibility with multiple users at once.
The largest possible platform for the smallest possible external footprint — it fits into spaces other lifts can’t.
Runs on single-phase 240 V on a dedicated 10-amp circuit and needs only a 60 mm pit, or a ramp model where a pit isn’t possible — minimal building work.
The chain drive system carries a lifetime warranty, with a five-year warranty on the motor.
Tailor the lift to suit your space.
Customer story
This Sydney office sits in a 150-year-old building where stairs were the only way to the first floor — and a conventional lift would have meant invasive, expensive work on a heritage structure. P. R. King & Sons fitted a Motala Hissar MC2000 commercial platform lift: a self-supporting structure that needed minimal structural change, a glass enclosure that keeps the building's open feel, and a chain drive with a lifetime warranty for smooth, quiet running in a working office. For a 15,000-member organisation, every member can now reach the first floor — and a staff member living with a disability takes the lift, not the stairs.
It's changed what we can offer our members. P. R. King & Sons have been terrific — they've operated professionally throughout the whole installation.
15,000-member organisation — MC2000 platform lift, heritage office, Sydney
Hi, I'm Daniel from P. R. King & Sons. This stunning office needed a compliant accessibility solution while respecting the building's architecture. Traditional elevator installations can be invasive, expensive and damaging to historical structures. So how do you add a contemporary lift without compromising?
The answer: the MC2000 commercial platform lift. The MC2000 combines cutting-edge engineering with elegant Swedish design by Motala Hissar — perfect for heritage spaces that demand both function and form. The innovative chain-drive system, backed by a lifetime warranty, delivers smooth, quiet operation that won't disturb the office.
Its footprint-to-platform-size ratio is a standout: compact on the outside, roomy on the inside. It can carry up to 500 kg and travel up to 4 m. The glass enclosure option maintains sight lines and preserves the building's open feel. And best of all, the MC2000 comes with a self-supporting structure, so there are minimal structural changes or building works of the kind that usually come with a traditional elevator. This accessibility solution is seamless and ideal for commercial applications.
Customer: This is an old building — 150 years old. There were stairs only leading up to the first floor, so there was no accessibility option for someone with greater accessibility needs.
What made you choose the MC2000 of all the models available? It's a niche building, and it just fitted perfectly into the spot. It's changed the way we work — well, it's changed what we can offer our members. As a 15,000-member organisation, it means we can offer opportunities to all of our members. We have a staff member who lives with a disability, and it's the lift all the way now — no more stairs. It's been a great safety aspect.
And how did you discover P. R. King & Sons? We discovered P. R. King & Sons through our contractor, who sought advice from operators in the Sydney area. P. R. King & Sons have been terrific — they've operated professionally throughout the whole installation, and we're looking forward to working with them in the future.
At P. R. King & Sons we've been helping Australians for over 100 years. We're experts in lift accessibility and would be very happy to help you with any lift solutions you need. If you have any questions about the MC2000, or about accessibility solutions for your commercial space, please contact us today.

A new CBD office complex wanted multi-level accessibility without sacrificing floor plate — the MC2000’s smallest-outside, largest-inside design delivered.
Read the story
Every square metre of this warehouse earns its keep — the MC2000’s compact footprint and self-supporting shaft delivered mezzanine access without stealing floor space.
Read the story
A lift that had to look like it belonged: this MC2000 sits flush in a modern office fit-out — glass door, crisp white frame, whisper-quiet between floors.
Read the storyMeet your obligations
Australian businesses and public buildings carry clear access obligations under the Disability Discrimination Act, the Premises Standards and the National Construction Code. Retro-fitting a full passenger lift can mean a pit, a machine room, three-phase power and weeks of disruption.
The MC2000 is a fully enclosed, self-supporting platform lift that carries its own machine room, so there is no external controller room to build. It runs on single-phase power, needs only a 60 mm pit or a ramp, and carries up to 500 kg over a rise of up to 4 metres — complying fully with EN81-41:2010 and AS1735.15:2021.
We produce site-specific drawings for your lift. A 10% deposit secures it.
Your drawings are approved and manufacture begins, with 40% due.
Your installation is scheduled on the lift’s arrival in Australia, with a further 40% due.
Your project manager oversees the installation, with the remaining 10% due at handover.
A vertical platform lift — sometimes called a wheelchair lift — moves straight up and down between levels on a platform. A wheelchair user rolls on and off without transferring, which makes platform lifts ideal where a stairlift or ramp won’t work.
An enclosed lift like the MC2000 carries passengers inside its own enclosure, which suits taller rises of up to 4 metres. A gated lift like the Opal has an open platform secured by interlocked gates, and suits shorter, simpler installs. We’ll recommend the right style at your site assessment.
The MC2000 has a 500 kg rated load and a larger floor space than a single-user lift, making it well suited to accessibility with multiple users — for example a wheelchair user and a support person.
Up to 4 metres — covering entrance steps, mezzanines and full storeys in commercial and residential buildings.
No. The MC2000’s machine room is built into the lift itself, so there’s no external controller room to find space for anywhere in the building.
Yes — glass is available on all four sides of the lift, for a minimalist look that doesn’t obstruct natural light. Manual swing or automatic doors are also available, with landing buttons placed wherever needed.
Pricing depends on your site and configuration, so we don’t publish a fixed figure — request the price guide above or call our Australian team on 1300 775 464 for a quote. Ordering is then a simple four-step process: drawings (10% deposit), order (40%), scheduled on arrival in Australia (40%), and installation (final 10% at handover).
A single-phase 240 V supply on a dedicated, RCD-protected 10-amp circuit — no three-phase connection is required.
Just a shallow 60 mm pit — or a ramp model where a pit isn’t possible, so there’s no major excavation.
The MC2000’s chain drive system carries a lifetime warranty, with a five-year warranty on the motor.
Your dedicated project manager sees the installation through from drawings to handover, and we provide fixed-price servicing for the life of the lift.
We install and service across NSW, VIC and QLD, and support Tasmania from Melbourne. Canberra and the ACT are covered from our Sydney office.
Come and see us
Visit one of our showrooms in NSW, VIC or QLD to see our lifts up close and talk through your project with our team — no pressure.



2026 price guide
Includes the full product brochure — free.
Tell us a little about your project — building or home — and we'll email you real 2026 price ranges for the MC2000 Commercial Platform Lift, with no obligation.