A smiling couple riding a glass-cab Single Rail Inclinator up its rack-and-pinion rail through sunlit gum trees on a steep hillside.

Inclinators™

Single Rail Inclinator™

P. R. King & Sons' own outdoor inclined lift — carrying you smoothly up a steep block, so a hillside, waterfront or clifftop home no longer means climbing flight after flight of steps.

Residential & commercialFor steep sites

  • Free site assessment
  • No obligation
  • Built in Australia to AS1735 Part 8

Ask DanielOur AI lift consultant

  • Since 1920Family-owned, four generations
  • Made in MarrickvilleOur own design & manufacture
  • AS1735 Part 8Approved by all Australian lift authorities
  • 12,000+ liftsInstalled across Australia

Key features & benefits

Built for the steepest sites — and made to suit your home.

  • Made for steep sites

    Designed to eliminate the constant climbing of steps on homes built on steep, hillside, waterfront and clifftop blocks, on an incline of up to 45 degrees.

  • Rack-and-pinion safety

    The car's drive gear stays in constant mesh with a rack on a treated-steel rail set on concrete foundations, so it cannot slide. A brake motor, a patented overspeed governor and combined safety gear back it up.

  • Made in Marrickville

    Every Inclinator is custom-built in our own Sydney factory, then installed under our own project manager and serviced by P. R. King & Sons.

  • Custom-made to suit your home

    Each Inclinator is built to your site and styled to complement your home, with a choice of cab styles, side infills and five standard colours.

  • Smooth and simple to use

    A variable-speed drive gives a smooth, quiet ride, with push-button controls at each landing and in the car. The empty car can even be called or sent between levels.

  • Carries your load, too

    With room for up to four passengers or 272 kg, it can also carry groceries, luggage and shopping up the hill — and a materials platform is available to help during building work.

Specifications

Capacity
2 or 4 passengers
Rated load
272 kg
Incline range
14° to 45°
Maximum travel
Up to 120 m (site-dependent)
Rated speed
0.4 m/s
Drive
Rack & pinion, variable-speed
Rail
150 UC steel rail with cast-iron rack
Drive motor
2.2 kW
Power supply
Dedicated 240V single phase
Platform size
1200 × 800 mm
Achievable grade change
8° over total length of travel
Standards
AS1735 Part 8

Choose with confidence

  • Serviced for the long termFixed-price servicing — we stand by every lift we install.
  • Dedicated project managerOne experienced project manager owns your installation from site assessment to handover.
  • Made and managed by usDesigned and built in our Marrickville factory, with installation managed by our own project manager.

Options & finishes

Tailor the Inclinator to suit your home.

  • Cab styles

    Choose a half-cab with a folding seat, or a full cab with a tinted Perspex dome roof and an electrically interlocked sliding door.

  • Side infills

    Perforated-aluminium or clear-acrylic side infill panels, with curved or square edges.

  • Five standard colours

    Black, Charcoal, Dark Green, Mist Green or Woodlands Grey — or a custom colour to your specification.

  • Landing controls

    Push-button controls at each landing and in the car, with an optional stainless-steel landing control post.

Australian made, since 1954

Designed and built in Marrickville — our own lift

The Inclinator™ is P. R. King & Sons' own product. In 1954 the King family built the very first Inclinator for a friend — a returned serviceman who had lost a leg in the war — so he could move freely around his steep Sydney home. We've been refining and building them in our Marrickville factory ever since.

Today every Single Rail Inclinator is still designed and manufactured in our own factory, installed under our own project manager and serviced by P. R. King & Sons. Each one is built in Australia to Australian Standard AS1735 Part 8 and has been approved by all lift authorities in Australia — and Inclinators have travelled far beyond Sydney, with units installed everywhere from waterfront NSW to Fiji, Hong Kong, Canada and the UK.

  • 1954the first Inclinator we built
  • 70+ yrsbuilding them in Marrickville
  • AS1735 Pt 8Australian-built & approved

Family-owned and Australian-made since 1920.

Getting your Inclinator — 10 simple steps

From your first call to handover. Tap any step to see what happens and who looks after it.

  • We handle it
  • You / your builder
  • Your decision
  1. Consultation

    We talk through the whole process with you — remotely or at your property — to understand your site and needs and explain the complete journey ahead.

    Looked after by P. R. King & SonsYou pay No cost
  2. Design

    Your Inclinator is designed to suit your site with a surveyor or architect. We provide our standard set-out drawings as the starting point for your custom solution.

    Looked after by Surveyor / architectYou pay Payment to your surveyor / architect
  3. Budgeting

    We give you a complete project cost projection for the Inclinator, with full transparency. We quote the Inclinator only — your builder quotes their work separately, and we can provide a list of qualified builders. Some sites also need an engineer, certifier or Sydney Water.

    Looked after by P. R. King & SonsYou pay No cost
  4. Approvals

    The Development Application (DA) is lodged. You can manage this yourself, but professional guidance keeps the approval process smooth.

    Looked after by Surveyor / architectYou pay Payment to your surveyor / architect
  5. Commitment

    You confirm your choice of builder and pay a deposit to secure your Inclinator and begin the next phase.

    Looked after by YouYou pay Deposit
  6. Certification

    A construction certificate is obtained before building begins — your builder arranges this, or we can connect you with a private certifier.

    Looked after by BuilderYou pay Handled through your builder
  7. Construction

    Your builder carries out the preparatory site works, liaising with our project manager throughout for seamless coordination.

    Looked after by BuilderYou pay Handled through your builder
  8. Manufacturing

    Once the building works are complete, we custom-build your Inclinator in our Marrickville factory to the final pier locations.

    Looked after by P. R. King & SonsYou pay Progress payment
  9. Installation

    Our own certified technicians install your Inclinator, then fully test and commission it.

    Looked after by P. R. King & SonsYou pay Progress payment
  10. Handover

    We hand over to you with training and documentation, once final payment is received. From there, P. R. King & Sons keeps your Inclinator serviced for the long term.

    Looked after by P. R. King & SonsYou pay Final payment

Recent installations

Inclinators across Sydney's steepest blocks

Every Inclinator is custom-built to its site. Here are a few we've recently designed, built and installed.

  • A Single Rail Inclinator on a steep landscaped block above a modern waterfront home with a pool, jetty and moored boat. Gladesville, NSW

    A glass-cab Inclinator links the upper terrace of a modern waterfront home down to the pool, jetty and boat — so a day on the water no longer starts with a flight of steps.

  • A half-cab Single Rail Inclinator on a timber side deck between two homes, with Pittwater and moored yachts beyond. Clareville, NSW

    Tucked neatly onto the side deck of a classic Pittwater weatherboard home, giving easy, level-entry access between the house and the waterfront below.

  • A glass-cab Single Rail Inclinator on its rail beside a contemporary steel-framed home and a matching steel staircase on a steep bushland block. Killcare, NSW

    A glass-cab Inclinator runs beside the entry stairs of a contemporary bushland home on a steep block — the lift for everyday trips, the stairs for when you feel like them.

Common questions

What is an Inclinator™?

An Inclinator™ is an inclined passenger lift — sometimes called an incline lift or hillside lift — that carries you up a slope on a rail, rather than straight up and down. P. R. King & Sons designed and built the first one in 1954, and 'Inclinator' is our registered trade name for our range of inclined lifts. The Single Rail model is our residential lift for steep blocks, carrying up to four people or 272 kg.

How steep a slope can it handle?

The Single Rail Inclinator runs on inclines from 14 up to 45 degrees, and can take an 8-degree change in gradient over the length of the rail — so it follows the natural fall of a steep or uneven block.

How many people can it carry, and can it carry shopping?

It carries up to four passengers or 272 kg on a platform of 1200 × 800 mm — ample for a couple of people plus groceries, luggage or laundry. During building work it can be fitted with a materials platform to help carry loads up the site.

Is it safe — what stops the car running away?

The car travels on wheels that run between the flanges of a treated-steel rail set on concrete foundations, with its drive gear in constant mesh with the rack, so it cannot slide down the rail. It's also fitted with a brake motor, a patented automatic overspeed governor and combined safety gear.

Does it meet Australian standards?

Yes. Every Inclinator is built in Australia to Australian Standard AS1735 Part 8 and has been approved by all lift authorities in Australia.

Can it be made to suit my home?

Every Single Rail Inclinator is custom-made. You can choose a half-cab with a folding seat or a full cab with a tinted dome roof, perforated-aluminium or clear-acrylic side panels, and one of five standard colours — Black, Charcoal, Dark Green, Mist Green or Woodlands Grey — or a custom colour.

How is it powered?

The Single Rail Inclinator runs on a dedicated 240-volt single-phase supply driving a 2.2 kW variable-speed motor, so it doesn't need three-phase power.

Do you install and service it yourselves?

Yes. P. R. King & Sons is responsible for every Inclinator from start to finish — designed and built in our own factory, with installation managed by our own project manager — and we offer service agreements, including after-hours service. Some of our Inclinators are still running after 50 years.

Where are Inclinators made?

Every Inclinator is designed and built in P. R. King & Sons' own factory in Marrickville, Sydney. We've been manufacturing them in Australia since 1954, and we install and service each one, with our own project manager overseeing every installation.

Where do you install Inclinators?

We supply, install and service Inclinators across New South Wales, Victoria and Queensland from our offices, and Inclinators have been installed right across Australia and overseas.

How much does a Single Rail Inclinator cost?

Because every Inclinator is custom-built to your site, the price depends on the slope, the distance of travel and your configuration — so we don't publish a fixed figure. Request the price guide above, or call our team on 1300 775 464 for a quote.

Recent Inclinator installs

Single Rail Inclinator carriage climbing the steep rock face beside the stairs of a Killcare waterfront home
Killcare, NSWSingle Rail Inclinator

From house to water’s edge down steep Killcare terrain — a custom Single Rail Inclinator rides the rock face, with the natural landscape left intact.

Read the story
Charcoal-framed Single Rail Inclinator carriage on the terrace of a harbourside home, moored boats behind
Waterfront homeSingle Rail Inclinator

At this harbourside home a Single Rail Inclinator now links garden, entertaining terrace and house — glass and charcoal, built for waterfront conditions.

Read the story
Single Rail Inclinator rail threading up through a steep, densely planted terraced garden
Steep gardenSingle Rail Inclinator

This home sits high above its driveway, up a steep planted garden — a Single Rail Inclinator now follows the slope’s own contour, and the garden reads untouched.

Read the story

Come and see us

See our access solutions in person

Visit one of our showrooms in NSW, VIC or QLD to see our lifts up close and talk through your project with our team — no pressure.

2026 price guide

Get Inclinator pricing

Tell us a little about your site and we'll email you indicative 2026 price ranges for the Single Rail Inclinator™ — custom-built to your block, with no obligation.

  • Indicative 2026 price ranges, emailed to you
  • Free site assessment & set-out drawings
  • Designed & built in our own Marrickville factory
Step 1 of 6

How soon do you need it?